That is where the tools length is stored. The other big one is the H code that goes with the Tool change. The biggest one is G54 – The position at the machine where you will save/store the origin of the part ( there are others as well G55, G56, G57….) I do remove the Coolant on and off M8 / M9. These are from the code Inventor CAM spits out and is what I am going with…. There is probably some of the code that is not necessary like the G30 (return to home). Díky tomu poskytuje funkce pro ízení obrábcího stroje pímo v CAD systému. InventorCAM funguje jako souást CAD systému Autodesk Inventor.

Some of the codes you need to add are for error coding, or canceling modes (if you have never called a mode to come on, then they are already canceled). InventorCAM je CAM, tedy software pro obrábní ízené poítaem. What they have already created will work once some additional setup code is added. The Tormach machines need a little more code (closer to what industry uses) than what is taught in the PLTW curriculum.

Can students simply paste the g-code that they have written by hand into the Tormach and run it without having to edit the g-code? For example… if they are doing the Yo-Yo Project? Answer: Download the answer as a handout

Inventorcam wikipedia